Removing The Flywheel; Removing The Reel Pulse P.c. Board And Solenoid - JVC UX-V30 Service Manual

Removing the Flywheel

(See Figs. 7 and 8)
1. Remove the head amplifier & mechanism control
P.C. board.
2. Remove the main motor assembly.
3. After turning over the cassette mechanism,
remove the slit washers "b" and "c" fixing the capstan
shafts R and L, and pull out the flywheel R and L
respectively from behind the cassette mechanism.
Flywheel R
Fig. 8

Removing the Reel Pulse P.C. board and Solenoid

(See Fig. 9)
1. Remove the five pails "d"~"h" reataining the reel pulse
P.C. board.
2. From the surface of the reel pulse P.C. board parts, remove
the two pawls "i" and "j" retaining the solenoid.
Solenoid
Flywheel L
j
Flywheel R
Capstan shaft R
Slit
washer
Fig.7
Fig. 9
Flywheel L
Capstan shaft L
Slit
washer
Reel pulse P.C. board
UX-V30
1-13