Cassette Mechanism Assembly; Removing The Opt.dig.out Board - JVC UX-V30 Service Manual

UX-V30
<Cassette mechanism assembly>
Prior to performing the following procedure, remove
the rear cover, the side panels and the cassette
mechanism assembly.

Removing the Opt.Dig.out board

1. Remove the two screws K attaching the Opt.Dig.out
board on the side of the cassette mechanism
assembly.
Removing the
assembly (See Fig.16 and 17)
Prior to performing the following procedure, remove
the Opt.Dig.out board.
1. Press the eject button on the front side of the
cassette mechanism assembly to open the cassette
door.
2. Remove the four screws L attaching the cassette
mechanism assembly on the back of the assembly.
1-8
(See Fig.16)
cassette mechanism
Eject button
Fig.16
Cassette mechanism
L
L
Fig.17
Cassette door
K
Opt, Dig.out board
L
L