Ip Igmp Snooping Vlan Query-Resp-Intvl - Motorola EX-3524 Cli Reference Manual

Chapter 20
| Multicast Filtering Commands
IGMP Snooping
ip igmp snooping vlan
query-resp-intvl
Command Usage
◆
An IGMP general query message is sent by the switch at the interval specified
by this command. When this message is received by downstream hosts, all
receivers build an IGMP report for the multicast groups they have joined.
◆
This command applies when the switch is serving as the querier
as a proxy host when IGMP snooping proxy reporting is enabled
Example
Console(config)#ip igmp snooping vlan 1 query-interval 150
Console(config)#
This command configures the maximum time the system waits for a response to
general queries. Use the no form to restore the default.
Syntax
ip igmp snooping vlan vlan-id query-resp-intvl interval
no ip igmp snooping vlan vlan-id query-resp-intvl
vlan-id - VLAN ID (Range: 1-4093)
interval - The maximum time the system waits for a response to general
queries. (Range: 10-31740 tenths of a second)
Default Setting
10 (1 seconds)
Command Mode
Global Configuration
Command Usage
◆
This command applies when the switch is serving as the querier
as a proxy host when IGMP snooping proxy reporting is enabled
Example
Console(config)#ip igmp snooping vlan 1 query-resp-intvl 20
Console(config)#
– 474 –
(page 462), or
(page 461).
(page 462), or
(page 461).