Motorola EX-3524 Cli Reference Manual page 303

port-channel channel-id (Range: 1-12)
Default Setting
Shows the counters for all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed. For a
description of the items displayed by this command, see "Showing Port or Trunk
Statistics" in the System Reference Guide.
Example
Console#show interfaces counters ethernet 1/17
Ethernet 1/ 17
===== IF table Stats =====
2166458 Octets Input
14734059 Octets Output
14707 Unicast Input
19806 Unicast Output
===== Extended Iftable Stats =====
5525 Multi-cast Output
===== Ether-like Stats =====
===== RMON Stats =====
16900558 Octets
40243 Packets
21065 Packet Size <= 64 Octets
0 Discard Input
0 Discard Output
0 Error Input
0 Error Output
0 Unknown Protocols Input
0 QLen Output
23 Multi-cast Input
170 Broadcast Input
11 Broadcast Output
0 Alignment Errors
0 FCS Errors
0 Single Collision Frames
0 Multiple Collision Frames
0 SQE Test Errors
0 Deferred Transmissions
0 Late Collisions
0 Excessive Collisions
0 Internal Mac Transmit Errors
0 Internal Mac Receive Errors
0 Frames Too Long
0 Carrier Sense Errors
0 Symbol Errors
0 Drop Events
170 Broadcast PKTS
23 Multi-cast PKTS
0 Undersize PKTS
0 Oversize PKTS
0 Fragments
0 Jabbers
0 CRC Align Errors
0 Collisions
– 303 –
Chapter 10
| Interface Commands
Interface Configuration