Motorola EX-3524 Cli Reference Manual page 347

Table 77: ATC Commands (Continued)
Command Function
auto-traffic-control Sets the upper threshold for ingress traffic beyond
alarm-fire-threshold which a storm control response is triggered after the
apply timer expires
auto-traffic-control auto- Automatically releases a control response
control-release
auto-traffic-control Manually releases a control response
control-release
SNMP Trap Commands
snmp-server Sends a trap when broadcast traffic falls beneath
enable port-traps atc the lower threshold after a storm control response
broadcast-alarm-clear has been triggered
snmp-server Sends a trap when broadcast traffic exceeds the
enable port-traps atc upper threshold for automatic storm control
broadcast-alarm-fire
snmp-server Sends a trap when broadcast traffic exceeds the
enable port-traps atc upper threshold for automatic storm control and
broadcast-control-apply the apply timer expires
snmp-server Sends a trap when broadcast traffic falls beneath
enable port-traps atc the lower threshold after a storm control response
broadcast-control- has been triggered and the release timer expires
release
snmp-server Sends a trap when multicast traffic falls beneath the
enable port-traps atc lower threshold after a storm control response has
multicast-alarm-clear been triggered
snmp-server Sends a trap when multicast traffic exceeds the
enable port-traps atc upper threshold for automatic storm control
multicast-alarm-fire
snmp-server Sends a trap when multicast traffic exceeds the
enable port-traps atc upper threshold for automatic storm control and
multicast-control-apply the apply timer expires
snmp-server Sends a trap when multicast traffic falls beneath the
enable port-traps atc lower threshold after a storm control response has
multicast-control- been triggered and the release timer expires
release
ATC Display Commands
show auto-traffic-control Shows global configuration settings for automatic
storm control
show auto-traffic-control Shows interface configuration settings and storm
interface control status for the specified port
* Enabling automatic storm control on a port will disable hardware-level storm control on the
same port if configured by the
Chapter 14
switchport packet-rate
– 347 –
| Congestion Control Commands
Automatic Traffic Control Commands
Mode
IC (Port)
IC (Port)
IC (Port)
IC (Port)
IC (Port)
IC (Port)
IC (Port)
IC (Port)
IC (Port)
IC (Port)
IC (Port)
PE
PE
command.