Configuration - Marantz VP-12S2 User Manual

Configuration

The following adjustments can be made:
Picture Adjust Lamp Mode
Setting High Bright
Display OSD Position
Config Language
Trigger 2
Ceiling
Memory Rear
Reset Lamp Life
Reset All
– OSD Position (16:9 / 4:3)
Select OSD position from 16:9 or 4:3.
Picture Adjust Contrast
Setting Brightness
Display Color
Config Sharpness
Trigger 2
Tint
Memory Noise Reduction
Color Temp.
Fine Menu
16 : 9 OSD position
– Reset Lamp Life
Lamp Life must be reset immediately if the lamp is replaced. Select "Reset Lamp Life" from Config menu. The menu shown
below is displayed.
Again, select "Yes", and press the ENTER key. Then the lamp life is initialized.
– Reset All
All settings are reset to the factory default settings except the lamp life.
When the user selects "Yes", the following message appears:
Again, select "Yes", and press the ENTER key.
26
High
Off
16:9
English
Off
Off
50
44
64
6
0
0
Middle
Lamp mode High, Low
High Bright On, Off
High Bright On : Display brightest image.
OSD Position 16:9, 4:3
Language English, German, French, Spanish,
Portuguese, Italian
Ceiling On, Off
On: The picture is reversed horizontally
and vertically.
Rear On, Off
On: The picture is reversed horizontally.
Reset Lamp Life Yes, No
Reset All Yes, No
Picture Adjust Contrast 50
Setting Brightness 44
Display Color 64
Config Sharpness 6
Trigger 2 0
Tint
Memory Noise Reduction 0
Middle
Color Temp.
Fine Menu
4 : 3 OSD position