Bluetooth Audio - Chevrolet 2014 TRAX Owner's Manual

7-26 Infotainment System
Using the AUX Movie Menu
1. Press MENU from the AUX
movie screen. The AUX menu is
displayed.
2. Press the desired menu.
tone settings: Adjust the
sound setup. See Tone
Settings under Radio
Controls with Touchscreen
in Operation on page 7-8.
clock/temp display: To
display the clock and
temperature on the full
screen, select On or Off.
display settings: Adjust the
brightness and contrast of
the screen.
4
3. Press .

Bluetooth Audio

Streaming Audio
If equipped, music may be played
from a paired Bluetooth. See
Bluetooth (Overview) on page 7-27
or Bluetooth (Voice Recognition) on
page 7-37 or Bluetooth
(Infotainment Controls) on
page 7-28 for help pairing a device.
The music can be controlled by
controls on the device.
To play music via Bluetooth:
1. Power on the device, pair, and
connect the device. The device
will display GM Audio Source.
2. Once paired, press CD/AUX to
select Bluetooth Audio.
3. Press the play button on the
device to begin playback.
When selecting Bluetooth audio, the
radio may not be able to launch the
audio player on the connected
device to start playing. When the
vehicle is not moving, choose the
phone to begin playback.
All devices launch audio differently.
When selecting Bluetooth audio as
a source, the radio may show as
paused on the screen. Press play
on the device to begin playback.
Some phones support sending
Bluetooth music information to
display on the radio. When the radio
receives this information, it will
check to see if any album art is
available and display it. For more
information about your phone and
supported Bluetooth features, see
www.gm.com/bluetooth.