Vehicle Messages - Chevrolet 2014 TRAX Owner's Manual

Units
This menu is not available while the
vehicle is moving. Press SET/CLR
while the unit display is active and
w x
move to change units when
UNIT SET is displayed. Press
SET/CLR to confirm the setting.
Select 1, 2, or 3 for the unit display.
1 is Imperial units, 2 is US units,
and 3 is metric units. This will
change the displays on the cluster
and DIC to the type of
measurements selected.
Language
This menu is not available while the
vehicle is moving. Press SET/CLR
while the language display is active
w x
and move to change the
language of the displays when
LANG SET is displayed. Select 1 or
2 for the language display. 1 is
Alphabet and 2 is Arabic Numeral.
Press SET/CLR to confirm the
setting.
Compass
See Compass on page 5-4 for
information on setting the compass.
Instruments and Controls

Vehicle Messages

DIC messages display when the
status of the vehicle has changed
and action may be needed to
correct the condition. Multiple
messages appear one after another.
Press any of the DIC buttons on the
turn signal lever to acknowledge
and clear them from the display.
More urgent messages cannot be
cleared from the DIC display. All
messages should be taken
seriously. Clearing messages will
not correct the problem.
Vehicle messages appear as code
numbers.
25: Left Front Turn Indicator Failure
26: Left Rear Turn Indicator Failure
27: Right Front Turn Indicator
Failure
5-25