Power Seat Adjustment; Lumbar Adjustment - Chevrolet 2014 TRAX Owner's Manual

3-4 Seats and Restraints
To adjust a manual seat:
1. Pull the handle at the front of
the seat.
2. Slide the seat to the desired
position and release the handle.
3. Try to move the seat back and
forth to be sure it is locked in
place.
Height Adjustment
If available, move the lever up or
down to manually raise or lower
the seat.

Power Seat Adjustment

To adjust the power driver seat,
if available:
Move the seat forward or
rearward by sliding the control
forward or rearward.
Raise or lower the front part of
the seat cushion by moving the
front of the control up or down.
Raise or lower the entire seat by
moving the rear of the control up
or down.
To adjust the seatback, see
Reclining Seatbacks on page 3-5.
To adjust the lumbar support, see
Lumbar Adjustment on page 3-4.

Lumbar Adjustment

Manual Seat Shown, Power Seat
Similar
If available, press the front or rear of
the switch to increase or decrease
lumbar support. Release the switch
when the desired level of support is
reached.