Installing Optional Porcelain Panels; Installing Optional Black Magic Panels - Vermont Castings VFF32LI Installation & Operating Instructions Manual

VFF Vent Free Fireplace System
INSTALLING OPTIONAL PORCELAIN
PANELS
NOTE: Porcelain liner kits are approved for use with op-
tional fireglass and log kits. These kits are designed to fit
VFF vent free fireplace systems. Please verify the size
and model number of your fireplace to be certain the kit
you purchased is correct.
KIT CONTENTS:
• One (1) Right panel
• One (1) Left panel
• One (1) Rear panel
• Four (4) Self-drilling #8 screws
INSTALLATION INSTRUCTIONS:
1. Remove screen frame, stones, fireglass or logs (if ap-
plicable).
2. Place rear panel against the center of the rear wall of
the firebox.
3. Place left and right panels against firebox sides and at-
tach top flanges of the panels using self-drilling screws
provided.
4. Replace fireglass or logs as applicable and re-install
screen frame.
Figure 58 -
Install Porcelain Panels
36
OPTIONAL ACCESSORIES
INSTALLING OPTIONAL BLACK MAGIC
PANELS
NOTE: Black Magic glass liner kits are approved for
use with optional fireglass and log kits. These kits are
designed to fit VFF vent free fireplace systems. Please
verify the size and model number of your fireplace to be
certain the kit you purchased is correct.
KIT CONTENTS:
• One (1) Center panel
• One (1) Left panel
• One (1) Right panel
• Two (2) Glass retainer brackets
• Two (2) Self drilling #8 screws
INSTALLATION INSTRUCTIONS:
1. Remove screen frame, fireglass or logs (if applicable).
2. NOTE: All panels will be installed with the dimples in
the glass facing the firebox.
Place rear glass liner panel against the center of the
rear wall of the firebox.
3. Place left and right glass liner panels against firebox
sides and attach at the top with retainer bracket using
supplied screws.
4. Replace fireglass or logs as applicable and re-install
screen frame.
Figure 59 -
Install Black Magic Glass Panels
20308184