Fault Finding Chart; Environmental Information; Replacement Parts; Service Recommendations - Flymo Sabre Trim Original Instructions Manual

FAULT
LINE NOT FEEDING
OR
LINE TOO SHORT
OR
TRIMMER VIBRATES
CONTINUOUS CLATTER-
ING NOISE
LINE SNAPS CONTINU-
OUSLY
WHEEL STOPS TURNING
IF NONE OF THE ABOVE
OR IF FAULT PERSISTS
• Awareness of the environment must be considered
when disposing of 'end-of-life' product.
• If necessary, contact your local authority for disposal in-
formation.
The symbol on the product or on its packaging in-
dicates that this product may not be treated as house-
hold waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical
Single spool and line
Reference no.
1. We strongly recommend that your product is serviced at
least every twelve months, more often in a professional
application.
2. Always use genuine Flymo Spare Parts.
3. Prepacked spares are available from most Husq-
varna UK Ltd. stockists.
4. Your product is uniquely identified by a silver and
black product rating label.
5. If you have a problem with your machine contact your
local Approved Service Centre ensuring you have full
details of your product as described on the product rat-
ing label.

Fault Finding Chart

Is the automatic line feed work-
ing?
Is the line fed out and visible?
Has line been removed from
cleat?
Is the manual line feed working?
Has the motor reached full speed
before use?
Has too much line been fed out?
Is the line cutter missing from the
safety guard?
Are you using the trimmer cor-
rectly?
Is the line jamming on the spool?
Clean wheel and groove on trimmer head. SEE "MAINTENANCE"
Contact Husqvarna UK Ltd. Customer Service
Telephone : 0844 844 4558 UK

Environmental Information

Replacement Parts

FLY047

Service Recommendations

CHECK
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential neg-
ative consequences for the environment and human
health, which could otherwise be caused by inappropri-
ate waste handling of this product. For more detailed in-
formation about recycling of this product, please contact
your local council office, your household waste disposal
service or the shop where you purchased the product.
Part no.
6. Should it be necessary for work to be carried out by your
Service Centre, it is important to take your complete ma-
chine including cable and any extension cables used.
A network of specialist dealers can be found in your local
Y ellow Pages. T o obtain service on your Flymo product sim-
ply telephone or visit your local Service Centre. Should you
require service under the terms of our guarantee the Serv-
ice Centre will require proof of purchase.
All of the centres listed stock genuine Flymo Spare Parts.
NOTE: Our Service Repairers act on their own behalf
and are not empowered to commit or legally bind
Husqvarna UK Ltd. in any manner whatsoever.
ACTION
Manually feed out line.
No
SEE "MANUAL LINE FEED"
Remove cap and spool, free line
No
and re-fit spool and cap. SEE "CUT-
TING HEAD"
The line may be jammed on the
spool. Rewind line to remove
No
crossed loops. Check that line is in
correct section of spool.
Allow the motor to reach full speed
No
before use.
Yes
SEE "MANUAL LINE FEED"
Contact your local approved Service
Centre or Husqvarna UK Ltd. Customer
Yes
Service.
Only use tip of nylon line to trim.
?
SEE "How to trim and edge"
Rewind the line on the spool, if
Yes
symptoms still persist, change
spool and line.
1800 882 350 ROI
510747890