Adjusting Wheelbase Width - Invacare Top End Everyday Series User Manual

6 WHEELS

6.13 Adjusting Wheelbase Width


Perform this procedure on one side of the wheelchair at a time for ease of adjustment.
Camber Tube with Single Camber

The wheelbase width can be increased/decreased by 1-inch (2.54 cm).
1. Remove the rear wheels.
2. Torque the axle nut to increase/decrease the wheelbase width.
3. Count the number of threads showing on the axle bolt.
 The number of threads showing on the axle bolt should
be equal on both sides of the wheelchair. Otherwise,
wheelchair performance may be affected.
4. Repeat STEPS 2-3 for the opposite axle nut and axle bolt.
 Axle bolt removed from axle tube for clarity. It is not
necessary to remove the axle both for this procedure.
Invacare® Top End® Everyday Series
Camber
Insert
Axle Nut
Threads
Axle Bolt
58
Axle Tube
Camber Clamp
Part No 1171801