Majestic 33LDVT Installation Instructions And Homeowner's Manual page 37

Main Connection
MAIN
Inlet
Pilot Adj.
PILOT
Outlet
Rubber Cap
FP1769a
Fig. 51 Remove rubber cap and adjust gas type marker.
5. Turn on gas supply and check that plugs are tight and
leak free.
FP1769
6. Install the enclosed identification label to the valve body
AF4000 valve face
2/07
where it can easily be seen.
Conversion is complete.
10007852
Gas Type Marker
(LP Position Shown)
Minimum
Rate Screw
CO137
LDVT Series Direct Vent GaS Fireplace
1. Reassemble the fireplace in the reverse order, except
for the window frame assembly. Leave this off until after
the unit has been checked for leaks and the gas supply
has been bled.
2. After bleeding the gas line and checking for leaks with a
soap solution, replace the window frame assembly. Fire
up the unit, check for flame impingement on the logs,
adjusting them if necessary. Check the manifold and
supply pressures against the appliance specifications.
37