Remote Control Code Setting - Marantz CC4003 User Manual

ENGLISH
ADVANCED OPERATIONS

REMOTE CONTROL CODE SETTING

• The unit and remote controller have fi ve sets
of built-in remote control codes for each. These
codes enable up to fi ve CC4003s installed in the
same place to be controlled independently.
• To use multiple units at the same time, set the
second, third, forth, and fi fth CC4003s and their
remote controller' remote control codes.
• To set the codes, follow the procedure below to
control only selected unit is remotely controlled.
• At the factory, the unit and remote controller
were set to CODE1.
12
REMOTE CONTROL UNIT SETTING
1 - 5
RECALL
• To set CODE2
Press RECALL button and Numerical button 2 on
the remote controller at a time for fi ve seconds or
more.
• To set CODE3
Press RECALL button and Numerical button 3 on
the remote controller at a time for fi ve seconds or
more.
• To set CODE4
Press RECALL button and Numerical button 4 on
the remote controller at a time for fi ve seconds or
more.
• To set CODE5
Press RECALL button and Numerical button 5 on
the remote controller at a time for fi ve seconds or
more.
Caution
To reset the remote control to CODE1, press
RECALL button and Numerical button 1 on the
remote controller at the same time for fi ve seconds
or more.
CC4003 SETTING
RECALL
PROGRAM
• To synchronize the remote control code of
a CC4003 with the corresponding remote
controller, simultaneously press the PROGRAM
and RECALL buttons on the remote controller.
• The remote control code set is displayed on the
display window on the unit for fi ve seconds, and
the setting is completed.
DISPLAY EXAMPLES
• When the remote controller is set to
CODE1
• When the remote controller is set to
CODE2
• When the remote controller is set to
CODE3
• When the remote controller is set to
CODE4
• When the remote controller is set to
CODE5