Playing Your Favorite Tracks Of A Disc; Remote Control Connecting Cable; Playing Your Favorite Parts Of A Track; Advanced Connections - Marantz CC4003 User Manual

ENGLISH
BASIC OPERATIONS
PLAYING YOUR FAVORITE
TRACKS OF A DISC
1.
2.
1.
2.
2.
1.
Press DISC1-5 button on the unit or remote
controller to choose the disc to play.
• At this time the fi rst track of the chosen
disc is played.
2.
Press 4/1, ¡/¢ button on the unit,
or 4, ¢ or 0-9 button on the remote
controller to choose the track number to
play.
(example)
• To choose the 9th track:Press 9.
• To choose the 23rd track: Press 2, and within 1
seconds press 3.
• To choose the 123rd track:
Press 1, within 1 seconds press 2, and within 1
seconds press 3.
8
PLAYING YOUR FAVORITE
PARTS OF A TRACK
1.
1.
1.
Hold 1 , ¡ button on the remote
controller or 4/1, ¡/¢ button on
the unit while playing to search the part to
play.
2.
Release the button when you have found
the part.

ADVANCED CONNECTIONS

CONNECTING TO A DIGITAL
AUDIO COMPONENT
The unit has one digital optical output connector and
one digital coaxial output connector.
You can enjoy digital recording when the unit
is connected to a CD recorder or other digital
recording component.
CONNECTING THE OPTICAL/COAXIAL
OUTPUT CONNECTORS
Use an optical/coaxial digital connecting cable
available on the market.
Insert the plug of the optical digital connecting cable
fi rmly in until it clicks into place.
Do not bend or bundle the optical digital connecting
cable.
REMOTE CONTROL REMOTE CONTROL ANALOG OUT ANALOG OUT DIGITAL OUT DIGITAL OUT FLASHER IN FLASHER IN
IN IN L
INTERNAL NTERNAL
RS RS-232C 232C
OUT OUT R
COAXIAL COAXIAL OPTICAL OPTICAL
Coaxial digital Optical digital
connecting cable connecting cable
(available on (available on market)
or
market)
Signal fl ow
:
REMOTE
DIGITAL IN/OUT
ANALOG IN/OUT
CONTROL
COAXIAL OPTICAL
L IN
R OUT
EXTERNAL INTERNAL
OUTPUT
INPUT
INPUT OUTPUT INPUT OUTPUT
CD recorder, MD deck, AV
amplifi er, etc.

REMOTE CONTROL CONNECTION

Connecting this unit to additional Marantz audio
equipment using the supplied remote control
connecting cable enables remote control of the
connected equipment as a single audio system.
• When connecting equipment incorporating a
remote sensor, connect the "remote control
out" connector of the equipment to the "remote
control in" jack of the unit.
When doing this, set this unit's switch to
"EXTERNAL." This will stop its remote control
IR receiver from operating and the unit can now
be controlled via the remote control IR receiver of
the attached equipment.
Set to "EXTERNAL."
REMOTE CONTROL REMOTE CONTROL ANALOG OUT ANALOG OUT DIGITAL OUT DIGITAL OUT FLASHER IN FLASHER IN
IN IN L
EXTERNAL EXTERNAL INTERNAL INTERNAL
RS-232C RS 232C
OUT OUT R
COAXIAL COAXIAL OPTICAL OPTICAL
Remote control
connecting cable
(supplied)
REMOTE REMOTE
CONTROL CONTROL
IN IN
OUT OUT
Amplifi er