Table of Contents
Advertisement
Key
Option
Tab
Select Field
-
Change
Value
+
Change
Value
F9
Setup
Defaults
F10
Save and
Exit
1230B0015201
Description
The Tab key is used to move between fields. For example, Tab can
be used to move from hours to minutes in the time item in the main
menu.
The minus key on the keypad is used to change the value of the
current item to the previous value. This key scrolls through the
values in the associated pick list without displaying the full list.
The plus key on the keypad is used to change the value of the current
menu item to the next value. This key scrolls through the values in
the associated pick list without displaying the full list. On 106-key
Japanese keyboards, the plus key has a different scan code than the
plus key on the other keyboard, but will have the same effect.
Pressing F9 causes the following to appear:
Setup Confirmation
Load default configuration now?
[Yes]
[No]
If "Yes" is selected and the Enter key is pressed, all Setup fields are
set to their default values. If "No" is selected and the Enter key is
pressed, or if the ESC key is pressed, the user is returned to where
they were before F9 was pressed without affecting any existing field
values.
Pressing F10 causes the following message to appear:
Setup Confirmation
Save Configuration changes and exit now?
[Yes]
[No]
If "Yes" is selected and the Enter key is pressed, all changes are
saved and Setup is exited. If "No" is selected and the Enter key is
pressed, or the ESC key is pressed, the user is returned to where they
were before F10 was pressed without affecting any existing values.
Table 3-2 Keyboard Command Bar Description
BIOS Setup
3-4
Advertisement
Table of Contents
