To Install The Battery; To Remove The Battery; Figure 2-3 Putting The Battery Into The Holder; Figure 2-4 Pulling The Battery Out Of The Holder - AMD Opteron 200 series User Manual

2.2.1 To install the battery

Figure 2-3 Putting the battery into the holder

2.2.2 To remove the battery

Figure 2-4 Pulling the battery out of the holder

Important: Do not bend the retaining clip during battery replacement. For proper
operation, the clip must maintain a position of contact with the battery.
1230B0015201
Pull the battery retaining clip away.
Put the battery into the holder until it fits
the space completely.
Pull the battery retaining clip away from
the battery.
Lift the battery out of the holder.
Hardware Operation
2-3