To Install The Heat Sink; Figure 2-7 Heat Sink And Sponge Location; Figure 2-8 Putting Down The Heat Sink; Figure 2-9 Rotating The Fasteners To Fit The Heat Sink - AMD Opteron 200 series User Manual

2.3.2 To install the heat sink

When installing the heat sinks, please pay more attention to the direction of them. The directions of
the heat sinks and two pieces of sponge are shown as below:
Note: Make sure these two heat sinks must be installed as the above pictures shows.
Please don't mistake the position of them.

Figure 2-8 Putting down the heat sink

Figure 2-9 Rotating the fasteners to fit the heat sink

1230B0015201

Figure 2-7 Heat Sink and Sponge Location

Hardware Operation
Place the heat sink onto the socket and
align the fasteners with the four holes on
the board.
Press down the fastener caps and then
rotate the fasteners clockwise to fix the
heat sink.
2-6