Display - Sony SRW-9000 Operation Manual

Name
PAUSE button and
indicator
a) E-E (electric to electric) mode: A state in which E-E signals can be monitored. Commonly used to monitor the camera
picture or the input signal before either is recorded.
b) E-E signal: A signal which passes solely through internal circuitry, and not through pathways in which magnetic
conversion takes place, such as magnetic heads and tapes.

Display

When you press the HOME button with the
FUNC button held down, sections 4 to 7 are
replaced by the display shown in section 9.
This manual refers to the screen shown below as
the HOME screen.
24 Locations and Functions of Parts
Pressed alone
Pauses tape transport. (The
indicator flashes during pause.) To
resume tape transport, press the
button again.
Pressed with FUNC button
Cues up a time data position specified with
FUNC+REC buttons or SYSTEM >EDIT
>IN POINT and stops. The specified time
data (Mark In data) is displayed in the format
"IN: xx:xx:xx:xx" in the time data field of the
display.
Note
The Mark In data is only temporarily
memorized in the unit's internal memory. It is
erased when you eject the cassette.