Sony SRW-9000 Operation Manual page 160

Item
FORMAT
Signal format settings
160 VTR Menu List
Settings
LINE Sets the number of effective lines and the scanning system.
1080I [1080I]
1080P [1080PsF/P]
FRAME When the SELECT FPS item is set to "OFF", sets the
operation frame frequency.
When the SELECT FPS item is set to "ON", sets the target
frame frequency.
23.98 [23.98]: Frame frequency 23.976 Hz
24 [24]: Frame frequency 24 Hz
25 [25]: Frame frequency 25 Hz (field frequency 50 Hz)
29.97 [29.97]: Frame frequency 29.97 Hz (field frequency
50 [50]: Frame frequency 50 Hz
59.94 [59.94]: Frame frequency 59.94 Hz
For more information, see "Using the Select FPS Function"
(page 103).
SIGNAL Sets the sampling method and video signal recording rate.
422 [4:2:2]: 4:2:2 (Y/Pb/Pr), 440 Mbps (880 Mbps for 50P
444SQ [4:4:4 SQ]: 4:4:4 (R/G/B), SQ mode, 440 Mbps
444HQ [4:4:4 HQ]: 4:4:4 (R/G/B), HQ mode, 880 Mbps
Notes
• "444SQ" and "444HQ" are displayed when the optional
HKSR-9003 is installed.
• Tapes recorded with the 444HQ setting cannot be played back
on the SRW-5000/5500. Also, certain limitations apply to
when tapes recorded in other 880 Mbps formats are played
back on the SRW-5000/5500.
For details, see "About Recording/Playback Formats"
(page 191).
SELECT FPS When the HKSR-9002 is installed, selects the operating
mode of the Select FPS function.
OFF [Off]: Do not use the Select FPS function.
ON [On]: Enable Select FPS function with frame rate (FPS)
For details on the settings, see "Select FPS Function" (page
102).
Note
To record 4:4:4 SQ 50P/59.94P format signals, the optional
HKSR-9002 must be installed, and SELECT FPS must be set to
"ON".
59.94 Hz)
or 59.94P)
(880 Mbps for 50P or 59.94P)
set on the subdisplay, control panel, or AP-1 Assistant
Panel.