Reading User Gamma Curves; Reading User Mlut Files; Storing Ohb Files - Sony SRW-9000 Operation Manual

2
Move the pointer to READ (MS t
CAM) and press the MENU SEL/
ENTER dial.
Unit settings change to reflect the settings loaded
from the reference file.

Reading User Gamma Curves

You can read gamma-curve (user gamma) data
that has been created using the CvpFileEditor
application software and saved to a "Memory
Stick". Use the <USER GAMMA> page of the
FILE menu.
Insert the "Memory Stick" into the "Memory
Stick" slot of the unit. Move the pointer to READ
(MS t CAM) in the USER GAMMA section
and press the MENU SEL/ENTER dial.

Reading User MLUT Files

You can read MLUT-curve (user gamma) data
that has been created using the CvpFileEditor
application software and saved to a "Memory
Stick". Use the <USER GAMMA> page of the
FILE menu.
Insert the "Memory Stick" into the "Memory
Stick" slot of the unit. Move the pointer to READ
(MS t CAM) in the MON LUT section and
press the MENU SEL/ENTER dial.

Storing OHB Files

Use the <OHB FILE> page of the FILE menu.
1
Execute STANDARD on the
<REFERENCE> page of the FILE
menu.
2
As required, use the MAINTENANCE
menu to set the items marked with "v"
in the "O" column of the table in "List
of Items Stored in Files" (page 170) to
the state that you want to store.
3
Display the <OHB FILE> page of the
FILE menu, move the pointer to
STORE FILE, and then press the
MENU SEL/ENTER dial.
Adjusting ND offset values
The white balance may shift slightly when the ND
filters are used. In this case, adjust the ND offset
values.
The ND offsets hold white balance compensation
values for each filter, using the white balance
when the ND:1 and CC:A filters are selected as a
reference.
Adjustment procedure
1
Switch the camera to Custom mode,
referring to "Switching between the
Basic Operation Modes" (page 39).
2
Execute STANDARD on the
<REFERENCE> page of the FILE
menu.
3
Execute AUTO BLACK on the <AUTO
SETUP> page of the MAINTENANCE
menu.
File Operations 177