Sony SRW-9000 Operation Manual page 183

Message Tally lamp
See "Error messages"
(page 185).
Problem Operation on the VTR
module
An error occurred Continues operation or
(Excepting "0050 NO stops, depending on the
REC RF"). type of error.
Message Tally lamp
0050 NO REC RF
Problem Operation on the VTR
module
• "0050 NO REC RF" Recording continues, but
error occurred.
the results may be invalid.
• RF signals cannot be
detected.
• Video head clogging
or failure in recording
system.
Message Tally lamp
–
Problem Operation on the VTR
module
Near tape end. Operation continues.
Message Tally lamp
–
Problem Operation on the VTR
module
Tape end. Recording, playback, and
fast forward stop.
Message Tally lamp
–
Problem Operation on the VTR
module
Battery is almost Operation continues.
c)
exhausted.
Message Tally lamp
–
Problem Operation on the VTR
module
c) Operation stops.
Battery is exhausted.
a) Flashes only during recording.
b) Output only during recording.
c) You can use the battery level/external power display
in the control panel display (see page 25 and page 28),
on the viewfinder screen, on an external monitor, and
Warning tone
Action to take
Check the error message, and resolve the condition,
referring to the "Description" column in the table of
"Error messages" (page 185). Or contact a Sony service
representative.
If a slack error occurs, refer to the maintenance manual
and remove the cassette, or contact a Sony service
representative.
Warning tone
a)
Action to take
Clean the video heads.
If recording fails after head cleaning, turn off the power
and contact a Sony service representative.
Warning tone
–
Action to take
Prepare an exchange cassette.
Warning tone
–
Action to take
Exchange the cassette, or rewind the tape.
Warning tone
–
Action to take
Exchange the battery.
Warning tone
–
Action to take
Exchange the battery.
Alarm tone
–
Alarm tone
b)
–
Alarm tone
Alarm tone
Alarm tone
Alarm tone
in the subdisplay to check the state of the battery (see
page 49 and page 66).
b)
b)
Warning System 183