Expanding the capabilities of your Joybook
Pay attention to the plug direction when making the following
connections. Incorrect direction may cause damage to the
device.
Access local area network (LAN) by connecting a network cable
to the LAN port of your Joybook.
Connect an external display device (such as a monitor or
projector) to the 15-pin D-sub video jack of your Joybook with
a VGA cable.
To switch to the external display device or simultaneous
display, press the <Fn> + <F3> hotkey combination.
Connect a separate audio or video device that has an HDMI
interface, such as an HDMI-capable display device, projector,
AV AV receiver, or any compatible device.
For details, refer to
"HDMI-output port (Version 1.3a; Type A
connector)" on page 8
and
page 28
Connect USB peripherals to the USB port(s) of your Joybook.
"Using the HDMI-output port" on
Getting started
5