Table of Contents
Advertisement
4. The Properties window will pop up. Click the
tab, and then click the
5. Select the appropriate mode according to the settings of your
LAN service from the
OK
and then click
.
6. If the situation persists, press the <Fn> + <F11> hotkey
combination to open Wireless Selector and disable the
wireless network by clicking on the Wi-Fi option (as shown
below) and
. This should reduce interference of different
network connection modes.
Wireless/Bluetooth:
Wireless:
I have a problem setting up wireless network.
Please follow the instructions below to resolve the problem:
50
FAQ and troubleshooting
Advanced
Speed & Duplex
item on the left.
Value
drop-down menu on the right,
• Have you enabled the WLAN function of the Joybook? Please
press the <Fn> + <F11> hotkey combination and enable a
WLAN (Wi-Fi) option.
Start
Control Panel
• Click
>
Connection
Network Connections
>
Wireless Network Connections
status is connected and with appropriate signal strength. If you
do not see the connection status, make sure your wireless
device is set up correctly so your Joybook can receive the
signal.
• Make sure your wireless router or access point is broadcasting
the SSID. Refer to your wireless device's documentation for
enabling this broadcasting feature.
Network and Internet
>
. Double-click
. Make sure the connection
Advertisement
Table of Contents
