Table of Contents
Advertisement
3. Click on the WLAN icon
at the lower right corner of the desktop. A list of available
wireless networks will be displayed.
4. Choose a network and then click Connect. If security
authentication is not required by the network you are using,
there will be a successful message showing that you have
connected to the network.
• To connect to some networks that require security
authentication, you may have to undergo another
authorization process and enter username and password.
For details, please consult your network administrator.
• For more information, refer to Start > Help and Support in
Windows XP or Windows 7.
• For data security, it is strongly recommended to connect to
security-enabled wireless networks whenever possible.
• When travelling by air, please be sure to turn off wireless
networking to avoid any possible risks to flight safety.
in the notification area located
There is another way for the Joybook to connect with a
network. See
"LAN (Local Area Network) port (RJ-45
connector)" on page
11.
Using your Joybook
21
Advertisement
Table of Contents
