Function Codes; Special Functions - VeriFone WAY S90 Quick Reference Manual

Offline Mode/Upload
If there is insufficient signal to process transactions Online, the terminal will automatically go into Offline
Mode. This means that the transactions have not been authorized but are being held in the terminal until
signal is reacquired. Receipts will be printed with OFFLINE in the title and TXN ACCEPTED will be
displayed instead of an approval or denial. Once signal is reacquired, you must Upload the transactions
for the authorization.
NOTE:
Offline transactions are run at your risk. Final authorization does not occur until transactions are uploaded
for approval.
End of Shift/End of Day
At the end of each shift or at the end of the day, it is suggested that you run reports and clear
transactions from the terminal. To run a Transaction Totals Report, press the key labeled [FUNC] then 71
and [ENTER]. If you want to run a Transaction Details Report, press the key labeled [FUNC] then 75 and
[ENTER].
To clear transactions from the terminal, press the key labeled [FUNC] then 76 and [ENTER]. Enter the 4
digit Manager password (default is 0000) and [ENTER]. To confirm that you want to clear all
transactions, press the [ENTER] key. If you do not want to clear the transactions, press the [CANCEL]
key.
Reprint Receipts
To reprint receipts from the last transaction, press [FUNC] key then 72 and [ENTER].
To reprint receipts from any transaction still in the terminal, press [FUNC] key then 73 and [ENTER].
Enter the Tran Seq # and [ENTER].

Function Codes

SPECIAL FUNCTIONS

FUNCTION?
72
73
71
75
76
From the Idle Screen:
Press the blue [FUNC] key then:
REPRINT LAST RECEIPT
REPRINT RECEIPT BY SEQUENCE NUMBER
TOTALS REPORT
DETAILS REPORT
CLEAR TRANSACTIONS FROM THE TERMINAL