Inform Tcm Of Compressed Volumes; Installing Other Development Software - Symbol PDT 3400 Series Product Reference Manual

3. Inform TCM of Compressed Volumes

For each compressed volume (46C and46D), use a text editor to create a file in C:\ called
STACINFO.46C or STACINFO.46D, respectively. The files each should contain a single line
of the following form:
Drive X was drive X at boot time [C:\STACVOL.YYY=ZZZMB]
where:
X is the drive letter assigned to the compressed volume.
YYY is 46C or 46D, as appropriate.
ZZZ is the size of the compressed volume as listed by Stacker.
All of this information can be obtained from the output of the STACKER command (given
in step 2). By redirecting the output of the Stacker command to a file, you can edit the output
file and copy the selected lines from the Stacker output to STACINFO.46C or
STACINFO.46D. Use the following command line to create the Stacker map output file:
STACKER > STACMAP.OUT
Note: Remove any leading blanks from the line extracted from
STACMAP.OUT when placing the line in STACINFO.46C or
STACINFO.46D.

Installing Other Development Software

Developing applications for the PDT 3400 may require installing other development software
such as application development environments (e.g., Visual C++) on the development PC.
Follow the installation instructions provided with this software.
Software Installation on Development PC
2-7