Table of Contents
Advertisement
Chapter 9
Operating the Terminal
Powering the PDT 3400 On and Off
The PDT 3400 powers on (resumes operation) as soon as power is supplied, by installing the
battery and by pressing the PWR key.
To suspend the PDT 3400's operation, momentarily press the red PWR key.
Booting
Cold Boot
To cold boot the PDT 3400, press and hold the PWR key for 12 seconds or for the amount
of time set in the BIOS Setup.
Warm Boot
To warm boot the PDT 3400, press the following key sequence:
<CTRL+FUNC+ESC+FUNC+BKSP>
which is equivalent to pressing <CTRL+ALT+DEL> on a PC.
Note: Press the keys one at a time in the sequence provided; you don't have
to hold them down together.
9-1
Advertisement
Table of Contents
