Icom IC-F43GT Instruction Manaul page 22

3
BASIC OPERATION
• When not answering the call
When not answerng call wth [PTT], the callng staton code
s stored nto call back memory. (max. 15 channels)
• " " blnks when a call from the staton that the staton code
does not stored n the call back memory, s receved.
• " " appears when the call back memory that call back op-
eraton has not been performed s/are stored.
➥ Push [Call Back] then [Up]/[Down] to select the desred call
back memory, and then push [PTT] or [Call Set Up] to reply
the call.
• The pre-programmed text name s dsplayed n case of the call-
ng code s memorzed n the memory.
18
Q01 302
D Receiving an group call
The transcever wats for a group call wth the selected group
code (that s selected wth [Group Selector] or [Up]/[Down])
or the pre-programmed group codes (stand-by group).
The transcever wats for a group call wth the pre-pro-
grammed stand-by group codes when an ndvdual code s
dsplayed. The pre-programmed stand-by group code s not
dsplayed on the LCD.
q When a group call s receved, beeps sound and the trans-
cever turns the communcatng condton automatcally.
• "GRP" and the callng staton code are dsplayed.
GRP 302
Recevng a group call wth the
selected group code.
GRP 1 302
Recevng a group call wth the
stand-by group code 1.