Displaying Messages - Icom IC-F43GT Instruction Manaul

Uhf trunked radios
Hide thumbs Also See for IC-F43GT:
Table of Contents

Advertisement

One of the followng messages wll be dsplayed accordng to
the transcever or system condtons.
Indication
ABORTED
Aborted: The call has been aborted. Re-call later.
ALERTING
Alerting
Auto (RF Power):
The automatic transmit output power
AUTO
selection is set.
Call Back:
The call is recorded at the calling station.
CALLBACK
Wait for the reply.
CALLING
Calling the station.
CANCELL
Canceled: The call/input has been canceled.
Ch
Ch##: Channel number ## (Conventional mode)
CLR DOWN
Clear Down: The communication connection is disconnected.
CONNECT
Connected: The call is succeeded. Communication can be made.
DESPATCH
Despatcher: The despatcher number is selected.
DIVERTED
Diverted: The call is transferred to another station.
DYN GRP
Dynamic Group: A new group number is set.
EMRGENCY
Emergency: [Emergency] is pushed and held.
ENGAGED
Engaged: The calling station is in busy. Re-call later.
Failed:
The call is failed. Or, the system does not support
FAILED
the calling number.
GRP
Group##: Stand-by group code ##
INTER--FL
Inter Fleet: The call is received from the different fleet.
Description

DISPLAYING MESSAGES

The dsplayng message can be edt wth the PC program-
mng.
Indication
INVALID
Invalid: The calling number is wrong.
LOW
Low#: The low transmit output power # is set.
Low Battery:
The battery is exhausted and the transceiver power is
LOW BATT
turned OFF automatically.
No Reply: No reply is received with the call.
NO REPLY
OK
OK: The call is succeeded.
Over Voltage:
OVERVOLT
PABX
PABX: Receiving a call from PABX.
PASSWORD
Password: Enter the password.
Q
Queue##: Call back memory number ##.
QUEUED
Queued: The call is waiting for turn. Wait for a while.
Ringing: Ringing the calling bell sound at the calling station.
RINGING
System Busy:
SYS BUSY
SYS WIDE
System Wide: Receiving a system wide call.
TEL
Telephone: Receiving a call from PSTN.
TIMEOUT
Timeout: The communication timer has been over.
TIM
Timer ##:##: The communicating timer indication.
Description
The supplied voltage exceeds the specified input
voltage range.
The system unable to receive a call because of
the system in busy. Re-call later.
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ic-f43gsIc-f44gtIc-f44gs

Table of Contents