Icom IC-F43GT Instruction Manaul page 14

3
BASIC OPERATION
D Despatcher call
A status s used for the despatcher call normally, however, the
drect despatcher call can be made accordng to the settng.
q Push [Despatcher] to select the despatcher call condton.
• "DESPATCH" s dsplayed.
w Push [PTT] or [Call Set Up] to make the despatcher call.
• When the drect despatcher call s nhbted, the status message
"0 (call back request)" s transmtted, then returns to stand-by
condton.
• "CALLING" s dsplayed and the callng beeps sound.
e When the call s succeeded, "CONNECT" and " " appear,
and communcaton can be made.
• The communcaton tmer starts count down at the same tme.
(When no transmsson tme lmt s set, the tmer counts up.)
10
DESPATCH
CALLING
CONNECT
TIM 0 56
r The warnng beeps sound 10 sec. before the communca-
ton tmer s actvated.
• The communcaton s dsconnected automatcally when the
communcaton tmer s actvated.
t Push [Clear] to dsconnect the communcaton manually.
• Pushng [M] and [#] n sequence also dsconnect the commun-
caton. (10-key verson only)
CLR DOWN