The Status Tab - Router; Figure 8-50: Status Tab - Router - Linksys WRT54G3G User Manual

Wireless-G Router for 3G/UMTS Broadband

The Status Tab - Router

The Router screen on the Status Tab displays the Router's current status.
Router Information
Firmware Version. This is the Router's current firmware.
Current Time. This shows the time, as you set on the Setup Tab.
MAC Address. This is the Router's MAC Address, as seen by your ISP.
Router Name. This is the specific name for the Router, which you set on the Setup Tab.
Host Name. If required by your ISP, this would have been entered on the Setup Tab.
Domain Name. If required by your ISP, this would have been entered on the Setup Tab.
Internet

Figure 8-50: Status Tab - Router

Configuration Type. Displayed here is the information required by your ISP for connection to the Internet. This
information was entered on the Setup Tab. Depending on the type of connection you use, the Connect or
Disconnect button will appear so you can start or end your Internet connection, or the DHCP Release and DHCP
Renew buttons will appear so you can release or renew the Internet IP address from this screen.
Click the Refresh button to view the latest status information.
Chapter 6: Configuring the Wireless-G Router for 3G/UMTS Broadband 83
The Status Tab - Router