The Status Tab - Router; Figure 6-43: Status Tab - Router - Linksys WRT54GS User Manual

Wireless-G Broadband Router with SpeedBooster

The Status Tab - Router

The Router screen on the Status Tab displays the Router's current status.
Firmware Version. This is the Router's current firmware.
Current Time. This shows the time, as you set on the Setup Tab.
MAC Address. This is the Router's MAC Address, as seen by your ISP.
Router Name. This is the specific name for the Router, which you set on the Setup Tab.
Host Name. If required by your ISP, this would have been entered on the Setup Tab.
Domain Name. If required by your ISP, this would have been entered on the Setup Tab.
Configuration Type. This shows the information required by your ISP for connection to the Internet. This
information was entered on the Setup Tab. You can Connect or Disconnect your connection here by clicking on
that button.
Chapter 6: Configuring the Wireless-G Broadband Router
The Status Tab - Router

Figure 6-43: Status Tab - Router

mac address: the unique address that a
manufacturer assigns to each networking device.
isp: your internet provider
domain: a specific name for a network of computers
60