Figure 6-4: Disconnect The Modem From The Computer Screen; Figure 6-5: Connect The Modem To The Router Screen - Linksys WRT54G3G User Manual

Wireless-G Router for 3G/UMTS Broadband
5. Make sure the Router is powered off.
6. Disconnect the Ethernet network cable from your computer. (This is the cable that connects the computer to
your modem.) Then click the Next button.
7. Connect the cable from the modem to the Internet port on the Router. (This is the same cable that you just
disconnected from your computer.) Click the Next button.
Chapter 5: Setting up the Wireless-G Router for Broadband WAN Service Only
Using the Setup Wizard
Figure 6-4: Disconnect the Modem from the Computer
Screen

Figure 6-5: Connect the Modem to the Router Screen

30