Security > Mac-Based Access Control (Mac) > Mac-Based Access Control Settings - D-Link DGS-1210/ME User Manual

4 Configuration
4. Ports that have been enabled for Link Aggregation, Port Security, or GVRP authentication cannot be
enabled for MAC-based Authentication.
Security > MAC-based Access Control (MAC) > MAC-based Access Control Settings
The MAC-based Access Control Settings page is used to configure the MAC Settings for the MA C-based
Access Control function on the Switch. The user can set the running state, method of authentication, RA
DIUS password, view the Guest VLAN configuration to be associated with the MAC-based Access Control
function of the Switch, and configure ports to be enabled or disabled for the MAC-based Access Control
feature of the Switch. Please rem ember, ports enabled for certain other features, listed previously, cannot
be enabled for MAC-based Access Control.
Figure 4.143 – Security > MAC-based Access Control (MAC) > MAC-based Access Control Settings
MAC-based Access Control Global Settings:
MAC-based Access Control State: Enable or disable the MAC-based Access Control function on the
Switch. Click Apply button to take effect.
Configuring the MAC Authentication Method:
Method: Specify the type of authentication to be used.
Local – Use this method to utilize the locally set MAC address database as the authenticator for
MAC-based Access Control.
RADIUS – Use this method to utilize a remote RADIUS server as the authenticator for MAC-based
Access Control.
Password: Enter the password for the RADIUS server, which is to be used for packets being sent
requesting authentication. The default password is "default".
Trap State: Enable or disable the MAC-based Access Control trap state. The default is disabled.
Log State: Enable or disable the MAC-based Access Control log state. The default is disabled.
Max User (1-1000): Specify the max users. The value is between 1~1000, and the default is 128.
Click the Apply button to implement the configuration changes.
Port Settings:
From Port / To Port: The ports of range to be configured for MAC-based Access Control.
State: Enable or disable MAC-based Access Control on the port or range of ports.
Aging Time (1-1440): Specify the aging time. The default is 1440.
Block Time (0-300): Specify the block time. The default is 300 and the value is between 1 to 300 seconds.
Click the Apply button to implement the configuration changes.
DGS-1210 series Metro Ethernet Managed Switch User Manual
8 8 3 3