Hot Plug; Spin Up Device - ASROCK EP2C612 WS User Manual

SATA Port 0 / 1 / 2 / 3 / 4 / 5
Depending on how many SATA ports you have, you will see SATA_x (x means number)
listed on the screen, with its status indicated as SATA device [(Model Name)] or [Not
Detected].
his model supports SATA Express. When a HDD is plugged into the the SATA Express
port, the HDD information here appears as [SATA_4/SATAE_0] and [SATA_5/SATAE_1].
External SATA
Use this item to enable SATA safe removal notiications. Please note that the SATA device
will be downgraded to SATA2.

Hot Plug

Designates this port as Hot Plugglable.

Spin Up Device

If enabled for any of ports, Staggered Spin Up will be performed and only the drives which
have this option enabled will spin up at boot. Otherwise all drives spin up at boot.
SATA Rx Setting
Adjust SATA DTLE DATA Values (0-15).
SATA Device Type
Identify the SATA port connected to Solid State Drive or Hard Disk Drive.
sSATA Storage Coniguration
sSATA Controller
Use this item to enable or disable sSATA Controller.
sSATA Mode Selection
Use this to select sSATA mode. Coniguration options: [Disabled], [IDE], [AHCI] and [RAID
] mode. he default value is [AHCI].
AHCI (Advanced Host Controller Interface) supports NCQ and other new features that will
improve SATA disk performance but IDE mode does not have these advantages.
sSATA Aggressive Link Power Mgnt
Use this item to conigure sSATA Aggressive Link Power Management.
EP2C612 WS
71