Chapter 3 Uefi Setup Utility; Introduction; Uefi Menu Bar - ASROCK EP2C612 WS User Manual

Chapter 3 UEFI Setup Utility

3.1 Introduction

h is section explains how to use the UEFI SETUP UTILITY to coni gure your system. h e
UEFI chip on the motherboard stores the UEFI SETUP UTILITY. You may run the UEFI
SETUP UTILITY when you start up the computer. Please press <F2> or <Del> during the
Power-On-Self-Test (POST) to enter the UEFI SETUP UTILITY; otherwise, POST will
continue with its test routines.
If you wish to enter the UEFI SETUP UTILITY at er POST, restart the system by pressing
<Ctrl> + <Alt> + <Delete>, or by pressing the reset button on the system chassis. You may
also restart by turning the system of and then back on.
Because the UEFI sot ware is constantly being updated, the following UEFI setup screens
and descriptions are for reference purpose only, and they may not exactly match what you
see on your screen.

3.1.1 UEFI Menu Bar

h e top of the screen has a menu bar with the following selections:
Item
Main
OC Tweaker
Advanced
Server Mgmt
Security
Boot
Event Logs
Exit
Use < > key or <
then press <Enter> to get into the sub screen. You can also use the mouse to click
your required item.
50
Description
To set up the system time/date information
For overclocking coni gurations
To set up the advanced UEFI features
To manage the server
To set up the security features
To set up the default system device to locate and load the
Operating System
For event log coni guration
To exit the current screen or the UEFI SETUP UTILITY
> key to choose among the selections on the menu bar, and