ASROCK EP2C612 WS User Manual page 38

Serial ATA3 DOM
Connectors
(SSATA_2)
(see p.6, No. 32)
(SSATA_3)
(see p.6, No. 30)
Consult the documentation that comes with your SATA DOM and check whether or not
Pin 7 requires 5V power supply.
If the connected SATA DOM requires 5V power supply, move the jumper caps placed on the
SATA DOM Power Jumper (SATAPWR_SEL1 or SATAPWR_SEL2) from pins 2-3 (default)
to pins 1-2.
If the connected SATA DOM does NOT require 5V power supply, connect the SATA DOM
power cable to the SATA DOM power header (SATA_PWR_1) and there is no need to
change the default jumper setting of the SATA DOM Power Jumper (pins 2-3).
Warning! Incorrect setting of the SATA DOM Power Jumper (SATAPWR1) may cause dam-
age to the motherboard or your SATA DOM.
SATA Power Connectors
(4-pin SATA_PWR1)
(see p.6, No. 31)
USB 3.0 Connector
(USB3_7)
(see p.6, No. 37)
he SATA3 DOM
connectors supports
both a SATA DOM
(Disk-On-Module) and
a SATA data cable for
internal storage device.
Please connect a SATA
power cable.
+5V
GND
GND
+12V
EP2C612 WS
31