Table of Contents
Advertisement
TM
2.11 CrossFireX
Quad CrossFireX
his motherboard supports CrossFireX
TM
and Quad CrossFireX
x16 graphics cards. Currently CrossFireX
TM
CrossFireX
are supported with Windows® 7 / 7 64-bit / 8 / 8 64-bit / 8.1 / 8.1 64-
bit OS.
1. You should only use identical CrossFireX
certiied.
2. Make sure that your graphics card driver supports AMD CrossFireX
Download the drivers from the AMD's website: www.amd.com
3. Make sure that your power supply unit (PSU) can provide at least the minimum
power your system requires. It is recommended to use a AMD certiied PSU. Please
refer to the AMD's website for details.
4. If you pair a 12-pipe CrossFireX
operate as 12-pipe cards while in CrossFireX
5. Diferent CrossFireX
TM
reX
. Please refer to AMD graphics card manuals for detailed installation guide.
6. When using the CrossFireX
connector (PCIE_PWR1).
2.11.1 Installing Two CrossFireX
, 3-Way CrossFireX
TM
Operation Guide
TM
, 3-way CrossFireX
that allows you to install up to four identical PCI Express
TM
, 3-way CrossFireX
TM
TM
Edition card with a 16-pipe card, both cards will
TM
cards may require diferent methods to enable CrossFi-
TM
, be sure to connect the power cord to the PCIe Power
TM
-Ready Graphics Cards
Step 1
Insert one graphics card into PCIE1 slot
and the other graphics card to PCIE3 slot,
or insert one graphics card into PCIE5
slot and the other graphics card to PCIE7
slot. Make sure that the cards are properly
seated on the slots.
Step 2
Connect a VGA cable or a DVI cable to the
monitor connector or the DVI connector of
the graphics card that is inserted to PCIE1
slot.
TM
, 4-Way CrossFireX
TM
, 4-way CrossFireX
TM
and Quad
-ready graphics cards that are AMD
TM
technology.
TM
mode.
EP2C612 WS
TM
and
TM
45
Hide quick links:
Advertisement
Table of Contents
