Kyocera FS-C2026MFP Operation Manual page 298

Border Line
Select the default value for border line when [2 in 1 Layout] is selected for Combine. Items available for the
default value are as follows:
None
l Solid Line
m Dotted Line
n Positioning Mark
Use the procedure below to select the default value for border line.
Sys. Menu/Count.: a b
User/Job Account
4
User Property
5
Common Settings
6
*********************
Common Settings: a b
Language
1
*********************
Default Screen
2
Sound
3
Function Default: a b
Color Selection
1
*********************
Scan Resolution
2
FAX Resolution
3
Detail Setting:
2 in 1 Layout
1
*********************
4 in 1 Layout
2
Border Line
3
Item
No border line.
Draws solid border lines.
Draws dotted border lines.
Puts a mark on the border line position.
[ Exit ]
[ Exit ]
[ Exit ]
a b
[ Exit ]
Description
1 In the Sys. Menu/Count. menu, press the
key to select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the or
4 Press the OK key. The Function Default menu
appears.
5 Press the or
6 Press the OK key. The Detail Setting menu
appears.
7 Press the or
8-50
Default Setting (System Menu)
key to select [Function Default].
key to select [Detail Setting].
key to select [Border Line].
or