Kyocera FS-C2026MFP Operation Manual page 256

Original/Paper Settings
Register additional types and sizes of originals and paper.
Custom Original Size Setup
Set up frequently-used custom original size. The dimensions available are as follows.
The table below lists the sizes that can be registered.
Inch models
Metric models
Use the procedure below to set a custom original size.
Sys. Menu/Count.: a b
User/Job Account
4
User Property
5
Common Settings
6
*********************
Common Settings: a b
Language
1
*********************
Default Screen
2
Sound
3
Orig./Paper Set.: a b
Custom Orig.Size
1
*********************
Def. Orig. Size
2
Custom PaperSize
3
Input units
X: 1.97 to 14.02" (in 0.01" increments)
Y: 1.97 to 8.50" (in 0.01" increments)
X: 50 to 356 mm (in 1 mm increments)
Y: 50 to 216 mm (in 1 mm increments)
[ Exit
[ Exit
[ Exit
Press the
5
brightness from [Darker -3] to [Lighter +3].
6 Press the OK key. Completed. is displayed and the
screen returns to the Common Settings menu.
Dimensions
In the Sys. Menu/Count. menu, press the
1
key to select [Common Settings].
]
Press the OK key. The Common Settings menu
2
appears.
]
3 Press the
Press the OK key. The Orig./Paper Set. menu
4
appears.
]
5 Press the
8-8
Default Setting (System Menu)
or key to select the display
or key to select [Orig./Paper Set.].
or key to select [Custom Orig.Size].
or