Table of Contents
Advertisement
3. Using the Baby Monitor
3.1
Setting Up
• Make sure the Baby Unit and Parent Unit are both switched on.
• Place the Baby Unit in a convenient location (e.g. on a table) and point the
camera lens towards the area you want to monitor.
• Adjust the Baby Unit's head angle by rotating the camera up, down, left and
right until you are satisfied with the image on the Parent Unit.
NOTE
Do not place the Baby Unit within reach of a child or baby(s)! If there is
interference with the picture or sound, try moving the units to different locations,
and ensure they are not close to any other electrical equipment.
3.2
Night Vision Mode
The Baby Unit has 8 high-intensity infrared LEDs for picking up clear images in
the dark. When the built-in photo sensor on the top of the unit detects a low level
of ambient light, the LEDs will automatically activate and the screen on the
Parent Unit will display in black and white. The
of the screen.
3.3
Video ON/OFF
You can turn off the Parent Unit screen without switching off the Parent Unit.
When the screen is turned off, you can still hear sounds from the Baby Unit.
Press the POWER ON/OFF button
turn the LCD screen on or off, but still leave the audio monitor on.
NOTE
When the screen is off, press any button to turn the screen back on.
14
N
icon will be displayed at the top
P
on the right side of the Parent Unit to
Using the Baby Monitor
Hide quick links:
Advertisement
Table of Contents
