3. Using the Baby Monitor
3.1
Setting up
• Place the Baby Unit in a convenient location (e.g. on a table) and point the
camera lens towards the area you want to monitor.
• Adjust the angle of the Baby Unit's camera by moving it up, down, left and
right until you are satisfied with the image shown on the Parent Unit.
NOTE
Do not place the Baby Unit within the baby's reach! If there is interference with
the picture or sound, try moving the units to different locations, and ensure they
are not close to other electrical equipment.
3.2
Pan and Tilt
The picture view can be remotely controlled from the Parent Unit when in zoom
mode.
M
1. Press the
button and the menu bar will pop up with
+
2. Press the
UP button or
O
to confirm.
3. While in Zoom mode, press and hold the
to move up or down the picture.
4. Press and hold the
across the picture.
3.3
Night Vision Mode
The Baby Unit has 6 high-intensity infrared LEDs for picking up clear images in
the dark. When the built-in photo sensor on the front of the unit detects a low
level of ambient light, the LEDs will automatically activate and the screen on the
Parent Unit will display in black and white. The
top of the screen.
3.4
Talk Mode
Press and hold the
the Baby Unit's loudspeaker. The
screen.
Using the Baby Monitor
-
DOWN button to select Zoom In and press
<
LEFT button or
T
TALK button on the Parent Unit to talk to your baby through
T
+
UP button or
>
RIGHT button to move left or right
icon will be displayed at the
icon will be displayed at the top of the LCD
highlighted.
-
DOWN button
13