Registration (Pairing) - Motorola MBP622 User Manual

2.4

Registration (Pairing)

The Baby Monitor Camera is pre-registered to your Parent Unit. You do not
need to register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the procedure
below:
1. Press the button on the Parent Unit and then press the
to select the ADD CAMERA icon
1 2 3 4
2. / / /
select the desired Camera identification number and press the
start searching for a Camera Unit. The Green Audio Level LED turns on
while searching.
3. Press and hold the PAIR button under the bottom left edge of the Camera
Unit until the Parent Unit finds the Camera, beeps and the video from the
Camera appears.
NOTE
If the Parent Unit already has cameras registered, they are indicated by a * next
to the identification number, and you will have to delete that registration (see
4.5.3 on page 17) before you can register another camera to that number.
If a Camera Unit is not found within about 30 seconds, the search will end and
the Parent Unit will return to its previous mode.
Getting Started
will pop up, press the
, and press the
+ -
UP button or
-
DOWN button
button to confirm.
DOWN button to
button to
13