Getting Started; Baby Unit Power Supply; Parent Unit Battery Installation - Motorola MBP622 User Manual

2. Getting Started

2.1

Baby Unit Power Supply

1. Insert the small plug of the Power Adapter into the socket at the back of the
Baby Unit (Camera) and plug the other end into a suitable electrical outlet.
NOTE
Only use the enclosed Power Adapter (6V DC / 500mA) with the slightly larger
DC plug.
2. Slide the ON/OFF switch to the ON position. The power LED will light up
in green.
3. Slide the ON/OFF switch to the OFF position to switch off the Baby Unit.
2.2

Parent Unit Battery Installation

The supplied rechargeable battery pack should be fitted so that the Parent Unit
can be moved without losing the link with the Camera. Charge the battery in the
Parent Unit before using it for the first time or when the Parent Unit indicates the
battery is low.
Black
1. Insert the plug of the rechargeable battery pack into the small socket inside
the battery compartment as shown above and fit the battery pack into the
compartment, with the wires pushed carefully alongside.
10
Red
Getting Started