Installing The Smartcard Reader - Fujitsu FUTRO S450 Operating Manual

System expansions

Installing the SmartCard reader

SmartCardreader
If not already installed, you can fit a SmartCard reader.
4
4
3
2
1
4
► Connect the cable to the SmartCard reader (1) and to the connector on the mainboard (2).
► With the component side facing downwards, insert the SmartCard reader on
the securing bolt in the direction of the arrow (3).
► Secure the SmartCard reader onto the carrier with the screws (4).
► Close the casing (see "Closing the casing", Page 18).
Make sure that the cables are not trapped between the casing and the components.
A26361-K522-Z226-1-7419, edition 2 English - 19