Installing And Removing The Smartcard Reader; S920/S930); Installing The Smartcard Reader - Fujitsu FUTRO S930 Operating Manual

System expansions
Installing and removing the SmartCard reader (only
FUJITSU Thin Client FUTRO S920/S930)
If you are also installing the optional loudspeaker, install the SmartCard
reader before the loudspeaker.

Installing the SmartCard reader

SmartCardreader
If not already installed, you can fit a SmartCard reader.
► Open the casing (see
► If a PCIe board is installed, you must remove the cross piece and PCIe
board (see "Removing the board", Page
► Carefully remove the cover of the SmartCard reader bay from the casing cover (1).
36
"Opening the casing", Page
60).
1
34).
Fujitsu