Mercedes-Benz CLS 2015 Operator's Manual page 294

Stowage areas
292
To raise the load surface: press switch
X
=.
Load surface ; of the box moves up auto-
matically.
To stow the box: push the box in by han-
X
dle : all the way to the stop.
Removing and installing
To install: insert retainer ; of box : into
X
slots =
Raise box : and press hooks A into
X
anchorage ? as far as they will go.
Turn left-hand rotating catch B clockwise
X
and right-hand rotating catch B counter-
clockwise by 90°.
To remove: turn left-hand rotating catch
X
B counter-clockwise and right-hand rotat-
ing catch B clockwise by 90°.
Move box : downwards and pull it out
X
from anchorages ?.
i
Store the EASY-PACK trunk box on a flat
surface after removal, e.g. on a suitable
shelf.
Stowage well under the trunk floor
! Unhook the handle before again before
closing the trunk lid and clip it in securely to
prevent the handle flap from protruding.
Otherwise, you could damage the handle.
The TIREFIT kit, the vehicle tool kit, etc. are
located in the stowage compartment.
To open: pull handle : up.
X
Hook handle : into rain trough ;.
X
Roof carrier
Important safety notes
G WARNING
When you load the roof, the center of gravity
of the vehicle rises and the driving character-
istics change. If you exceed the maximum roof
load, the driving characteristics, as well as
steering and braking, will be greatly impaired.
There is a risk of an accident.
Never exceed the maximum roof load and
adjust your driving style.