Connecting To Your Device - Zte Z079584505806 User Manual

Internet Access

Connecting to Your Device

1. Power on your device. It will take 1-2 minutes to initialize.
2. Use your normal Wi-Fi application to search for available wireless networks.
NOTE: To obtain an IP address automatically, refer to the section "Configuring
Your PC."
3. Select the SSID of your device, and then click Connect.
NOTE: Please check the label on your device to get the default SSID.
12
4. Your computer will then connect to the Z250G device.
Using the WPS (Optional)
If your computer or other Wi-Fi enabled device supports WPS, you don't have to
input the password manually.
1. Power on the Z250G device and the device you wish to connect.
2. Enable Wi-Fi on the device you wish to connect to the Z250G device.
3. Press and hold the WPS Button on the Z250G device to start the Wi-Fi
Protected Setup authentication process.
4. Enable the WPS function on the device you wish to connect to respond to this
authentication process.
5. Follow the system prompts on your device to finish the connection.
NOTE:
• If the current security mode of the device is OPEN, the WPS function will
be disabled.
Internet Access
13