Sleep Mode; Charging Your Device; Internet Access; Connection Scenario - Zte Z079584505806 User Manual

Getting Started

Sleep Mode

If you enable the Wi-Fi function, use the battery to supply power to the device, and
do not connect to the device within the specified time, the device will enter sleep
mode. In sleep mode, the Wi-Fi function will be disabled. Press the Power or WPS
button to wake up the device and enable the Wi-Fi function.
NOTE: With USB connection, if no Wi-Fi user connects to the device within
the specified time, only the Wi-Fi function will be disabled. Press the Power or
WPS button to enable this function.

Charging Your Device

You can charge your device by using the USB cable or adapter.
• Use the USB cable to connect your device and PC directly.
• Use the adapter and USB cable to connect the wall outlet and your device.
NOTE: The plug only fits one way to connect your device. Do not use excessive
force to insert the plug.
8

Internet Access

Connection Scenario

The following picture is an example of device connection. All of these devices can
surf the Internet at the same time.
NOTE: You can only use Wi-Fi to connect to the Z250G device. Make sure the
devices you wish to connect to the Z250G support Wi-Fi.
9